Kelo building material

Kelo Panel wall

Kelo wood panel

The kelopanel is easy and quick to install. It is suitable for the sauna room and actually for any place where you want to create a genuine Nordic atmosphere. Kelopanel can also be used for outdoor cladding in which more robust material is used.  The panels are grooved and fitted with tongue batten to each other. The width of the panels varies between 15-20cm and the strength 3-8cm. The length is cut according to your needs.

Kelo sawn timber 50mm

The sawn timber is grooved and fitted with tongue battens to each other. Here we offer the options of grey on the front surface as well as totally light on the front surface. Additionally, you can choose to have the surfaces either machine hewn or flat milled. The length is cut according to your needs.

Kelo planks 44mm

Kelo planks suit well as material for the sauna benches. The length is cut according to your needs.

Kelo boards 20mm

Kelo boards for instance for ceilings as shown in picture. Kelo-surface on the sides of the boards as top panels. The inner boards are trimmed. Thickness of the boards is 20 mm. The panels are mounted on top of each makes a total thickness of 40mm ( 20+20 = 40 mm).

The top board with grey sides is 17-28 cm wide. The trimmed inner board with one planed side is always 15 cm wide. The length is cut according to your needs.

Kelo surface

Without groove and tongue batten we offer kelo surface.
This material suits well for instance for wall cladding or for sauna benches.